SICK SIM1004, Operating Instructions Manual

Page: 14 / 30

5 Mounting
5.1 Overview of mounting procedure
NOTE
The mounting procedure described here for the device meets the requirements for use
in the target system.
Additional or different requirements may become necessary in the laboratory and dur‐
ing preparation, and should be taken into account as necessary,
see "Commissioning",
page 21 . If you have any questions or anything remains unclear in this regard, please
contact our service team.
• Mounting the device.
• Connect the cables.
• Connecting peripheral devices.
• Connecting the voltage supply.
5.2 Scope of delivery
• SIM1004
• 1x grounding screw
• 1x toothed lock washer
• Safety note
• Optional: ordered accessories
NOTE
For a list of cables suitable for use with the device, see: supportportal.sick.com or
at www.sick.com .
5.3 Preparing for mounting
Installation requirements
NOTE
The specific mounting instructions must be taken into account at high ambient temper‐
atures from 40 °C.
For additional information
see "Mounting the device at a critical ambient temperature
from 40 °C", page 15 .
• Select the mounting site: Plan space requirements and sufficient distance from
other devices. Be aware of the possibility of heat dissipation.
• Unpack the device and allow to acclimatize to avoid formation of condensation.
Preparing for mounting
1. Place the device at the mounting site.
2. Mark the mounting holes.
3. Proceed to drill the mounting holes.
5
MOUNTING
14 O P E R A T I N G I N S T R U C T I O N S | SIM1004 8023516/1BQH/2021-07-28 | SICK
Subject to change without notice