6
Commissioning
6.1
Important information
NOTICE
Commissioning may only be performed by qualified persons.
•
Qualified persons have the specialist training, skills, experience and knowledge
of the relevant regulations and standards needed to be able to perform work
assigned to them and to identify and avoid any potential dangers independently.
•
Electricians have the professional training, skills, experience and knowledge of the
relevant standards and provisions needed to work on electrical systems and to
detect and avoid any potential dangers independently.
6.2
Configuration
Configuration is performed via a separate configuration computer or directly via the
touchscreen on the panel PC.
Depending on how the data cable is connected, the configuration computer is con‐
nected directly to the device or via the controller or Ethernet switch.
6.3
Configuration software
The following software components are pre-installed on the device:
•
SOPAS configuration software
6.3.1
Starting the SOPAS configuration software
Approach
b
Start SOPAS either on the configuration PC, or on the device via a remote desktop
connection depending on the connection scenario.
Figure 5: Open SOPAS via the remote desktop connection
COMMISSIONING
6
8027793/V1-0/2022-07-01 | SICK
O P E R A T I N G I N S T R U C T I O N S | SID Pro
19
Subject to change without notice