4
Mounting
4.1
Important information
NOTICE
All transport, assembly, mounting, and electrical installation work must only be carried
out by qualified persons.
•
Qualified persons have the specialist training, skills, experience and knowledge
of the relevant regulations and standards needed to be able to perform work
assigned to them and to identify and avoid any potential dangers independently.
•
Electricians have the professional training, skills, experience and knowledge of the
relevant standards and provisions needed to work on electrical systems and to
detect and avoid any potential dangers independently.
4.2
Mounting the panel PC
Overview
The following mounting variants exist:
•
Front-loading mounting (in the control cabinet)
•
VESA mounting (procedure is described below)
°
VESA mounting system with telescopic and swivel function is available as an
accessory.
°
The rear of the panel PC has a mounting hole pattern that is intended for use
with the VESA bracket.
Approach
1.
Insert the two sliding nuts into the slot on the aluminum profile.
2.
Attach the mounting arm to the frame using the two screw holes in the mounting
profile.
3.
Mount the VESA bracket on the rear of the panel PC using the four fixing screws.
4.
Place the VESA bracket on the mounting arm and screw them together.
MOUNTING
4
8027793/V1-0/2022-07-01 | SICK
O P E R A T I N G I N S T R U C T I O N S | SID Pro
13
Subject to change without notice