5.6
Connecting the customer network (optional)
Prerequisites
•
The customer interface must be connected via the DHCP port LAN1.
•
The port used must first be configured to be in the address range of the customer
network and be enabled in the firewall of the customer network.
Approach
b
Configure the Ethernet port on the device.
b
To do so, assign an IP address from the address range of the customer network.
b
Plug the Ethernet cable into the DHCP port.
b
Connect the cable to the customer network.
5
ELECTRICAL INSTALLATION
18
O P E R A T I N G I N S T R U C T I O N S | SID Pro
8027793/V1-0/2022-07-01 | SICK
Subject to change without notice