![background image](http://html1.mh-extra.com/html/sick/pac50/pac50_operating-instructions-manual_1264699049.webp)
O p e r a t i n g I n s t r u c t i o n s | S I C K
4 9
Operating Instructions
PAC50
8017612/ZAB1/2017-02-14 | PAC50
Subject to change without notice
2 Safety
2 Safety
WARNING
Failure to observe the following safety notes and warnings may result in personal injury and
material damage.
2.1 Authorized personnel
Due to their specialist training, knowledge of measuring and control technology, and experience, as well
as their knowledge of country-specific regulations and the relevant standards and provisions, the technical
personnel are able to perform the work described and detect any potential dangers independently.
2.2 Correct use
The PAC50 is an electronic pressure switch for monitoring the pressure of compressed air. It must only be
used by authorized personnel and only in industrial environments. If the PAC50 is used for any other purpose
or modified in any way, any warranty claim against SICK AG shall become void. The PAC50 is only to be operat
-
ed under the specific process conditions and ambient conditions specified in these operating instructions.
2.3 General safety notes and protective measures
The device is only to be used if it is in perfect working order.
2.3.1 Electrical installation work
•
Only authorized personnel are allowed to perform the electrical installation work
•
Electrical connections between the PAC50 and other devices may only be made when there is no power to
the system
•
Only operate within the specified voltage range
•
Only operate with the loads specified in these operating instructions
•
Do not use damaged cables (risk of short-circuiting or water ingress via the cable/male connector)