O p e r a t i n g I n s t r u c t i o n s | S I C K
7 1
Operating Instructions
PAC50
8017612/ZAB1/2017-02-14 | PAC50
Subject to change without notice
7 Operation and parameter settings
Description
Value range
Factory settings
OU2
PARA
Switching function, switching output 2
(if second switching output is available):
Hysteresis function, normally open:
HNO
Hysteresis function, normally closed:
HNC
Window function, normally open:
FNO
Window function, normally closed:
FNC
Diagnostic function:
DIA
HNO, HNC, FNO, FNC, DIA
HNO
P-N
PARA
Switching logic for switching outputs:
pnp
,
npn,
or
push-pull
(applies for both switching outputs, if second switching output is
available. Q1 is always PNP for the IO-Link option)
PNP, NPN, P/P
PNP
OUA
PARA
(if analog output is available):
Output signal 4 to 20 mA:
I
Inverted output signal 20 to 4 mA:
IINV
Output signal: 0 to 10 V:
U
Inverted output signal 10 to 0 V:
UINV
Automatic detection depending on applied load (non-inverted
output signals):
AUTO
I, IINV, U, UINV, AUTO
AUTO
UNIT
Unit
Unit of pressure setting in the display
BAR, MPA, KPA, PSI, inHg
BAR
0SET
YES/NO
Zero offset correction, max. 5%
–
DISM
PARA
Indication of switching points/window limits in display areas C
and E:
SPRP
Indication of LOW/HIGH values in display areas C and E:
LoHi
SPRP, LoHi
SPRP
DISU
Value
Display update
1/2/5/10 Display updates/second
5/s
DISR
YES/NO
Turns display indicator in the relevant display field upside down
electronically
NO
