O p e r a t i n g I n s t r u c t i o n s | S I C K
6 9
Operating Instructions
PAC50
8017612/ZAB1/2017-02-14 | PAC50
Subject to change without notice
7 Operation and parameter settings
Display mode
(2 s)
Programming
mode
Description
Value range
Factory settings
SP1/FH1
Value
Switching point 1/upper window limit 1
Min: LLR +0.2% of the range, max: ULR
ULR
RP1/FL1
Value
Reset point 1/lower window limit 1
Min: LLR, max: ULR -0.2% of the range
ULR - 10%
SP2/FH2
Value
Switching point 2/upper window limit 2 (if second switching output
Min: LLR +0.2% of the range, max: ULR
ULR
is available and not configured in diagnosis mode)
RP2/FL2
Value
Reset point 2/lower window limit 2 (if second switching output
is available and not configured in diagnosis mode)
Min: LLR, max: ULR -0.2% of the range
ULR - 10%
EF
RES
YES/NO
Resets the set parameters to the factory settings (also resets the
saved HIGH and LOW values)
DS1
Value
Switching delay 1
0 to 50 s
0 s
DR1
Value
Reset delay 1
0 to 50 s
0 s
DS2
Value
Switching delay 2 (if second switching output is available)
0 to 50 s
0 s
DR2
Value
Reset delay 2 (if second switching output is available)
0 to 50 s
0 s
OU1
PARA
Switching function, switching output 1:
Hysteresis function, normally open:
HNO
Hysteresis function, normally closed:
HNC
Window function, normally open:
FNO
Window function, normally closed:
FNC
HNO, HNC, FNO, FNC
HNO
