manualshive.com logo in svg

SICK MCS200HW, Operating Instructions Manual, Page: 51 / 74

Share
Download
SICK MCS200HW Operating Instructions Manual Download Page 51

Important information

NOTICE

Dirt can get into the measuring device when replacing the filter pad.

b

Only replace the filter pad when the measuring device is switched off.

Prerequisites

•

The device is switched off.

Procedure

1.

Loosen 4 screws on the fan grill (1/4 turn).

2.

Take fan grill off.

3.

Replace the filter pads (face in) on all four sides.

4.

Fit the fan grill again and screw tight.

10.7.2

Replacing the filter pad

Important information

NOTICE

Dirt can get into the measuring device when replacing the filter pad.

b

Only replace the filter pad when the measuring device is switched off.

Prerequisites

•

Measuring device is switched off.

Procedure

1.

Open the cover of the fan.

2.

Take filter pad out.

3.

Insert new filter pad.

4.

Close the cover.

MAINTENANCE 

10

8021889/1D1T/V3-1/2021-09 | SICK

O P E R A T I N G   I N S T R U C T I O N S | MCS200HW

51

Subject to change without notice

Summary of Contents for MCS200HW











































































Reviews:

No comments