Procedure
1.
Remove loose contamination with compressed air.
2.
Remove adhering contamination with a mild soap solution and a soft cloth. Make
sure electrical parts do not come into contact with liquids.
10.3.2
Cleaning the display
Overview
The display must be cleaned regularly from the outside to ensure heat dissipation and
thus operation.
Important information
NOTICE
Device damage through incorrect cleaning.
Incorrect cleaning can lead to device damage.
•
Only use recommended cleaning agents.
•
Do not use sharp objects for cleaning.
Procedure
1.
Wipe the surface with a damp soft cloth and wipe again with a dry soft cloth.
2.
If the frames are heavily soiled, do not use acidic or abrasive cleaners, as these
attack the surface structure. Use neutral soap sud or limescale remover specially
suitable for the surface.
3.
Use 2-propanol/isopropanol (isomeric alcohol) for disinfection.
10.4
Maintenance plan
Overview
This Maintenance plan describes the maintenance work specified by the manufacturer.
Perform checks in accordance with the guidelines to be applied by the operator in
accordance with the intervals described therein.
MAINTENANCE
10
8021889/1D1T/V3-1/2021-09 | SICK
O P E R A T I N G I N S T R U C T I O N S | MCS200HW
47
Subject to change without notice