SICK MCS200HW, Operating Instructions Manual, Page: 42 / 74

2.4.3 Reference point drift (internal adjustment
filter) Displays the determined percentage
deviation of measuring component con‐
centration after validation with an
adjustment filter.
2.4.4 Reference point drift (span gas) Displays the determined percentage
deviation of measuring component con‐
centration after validation with span
gas.
2.5 Settings
2.5.1 Span gas concentrations Entry fields for updating the span gas
concentrations.
2.5.2 Component-specific parameters Displays the parameters of the individ‐
ual measuring components.
2.5.3 Parameters Displays general parameters and
parameters relevant for adjustment.
2.5.4 Cyclic triggers Displays configured start times of
sequences.
3 Diagnosis
3.1 Status Displays device information and the
current status.
3.2 Logbooks
3.2.1 Device logbook Logbook of pending messages and sta‐
tus with start and end date.
3.2.2 Customer protocol Tile “Edit” allows entries by operator
and maintenance personnel.
3.3 Device state data
3.3.1 Operating hours counter Displays operating hours.
3.3.2 Temperatures Displays temperatures and their status.
3.3.3 IR source Displays IR source status.
3.3.4 Motors Displays motor values.
3.3.5 Pressure Displays current pressures.
3.3.6 Flow rate Displays flow rates and their status.
3.3.7 Hardware monitoring Displays values and hardware status.
3.3.8 O2 sensor Displays values and O2 sensor status.
3.3.9 Reference energy Displays reference energy of the individ‐
ual measuring components.
3.3.10 Intensity Displays intensities of measuring filters
and reference filters.
3.4 Interfaces
3.4.1 Analog outputs Displays current mA of the individual
analog outputs.
9
MENUS
42 O P E R A T I N G I N S T R U C T I O N S | MCS200HW 8021889/1D1T/V3-1/2021-09 | SICK
Subject to change without notice