12
Decommissioning
12.1
Switching off
12.1.1
Switching the device off
Important information
CAUTION
Poisoning hazard through sample gas
Sample gas may be present in the components in contact with the sample gas after
switching off.
b
Set the measuring device to Standby mode before turning it off.
Prerequisites
•
The instrument was purged with instrument air for 10 minutes in Standby mode.
Procedure
1.
Switch off the instrument via a separate main switch or via the FI (FB1) switch in
the sample conditioning and distribution unit.
2.
In case of prolonged shutdown: Pull the gas extraction unit out of the stack.
12.2
Transport
Procedure
1.
Protect the device before transport.
2.
Use the original packaging for transport or alternatively a suitable padded stable
packaging.
A transport container with adequate stability can also be used.
3.
Protect the device with padding from shocks and vibrations.
4.
Thoroughly secure the device in place inside the transport container. Make sure
there is sufficient space between the analyzer and the walls of the transport
container.
12.3
Return delivery
12.3.1
Shipping for repair
Overview
You can find all information on the repair flat rates, Repair Form (incl. Non-Risk Declara‐
tion and return information) at
.
Important information
NOTE
Without the Non-Risk Declaration, the device will either be cleaned by a third-party
company at the customer's expense or the package will not be accepted.
Procedure
1.
Contact your local SICK representative. Addresses: See last page of Operating
Instructions.
2.
Clean device.
DECOMMISSIONING
12
8021339/1CHC/V1-1/2021-07 | SICK
O P E R A T I N G I N S T R U C T I O N S | MARSIC280
111
Subject to change without notice