4.
Connect the power supply of the gas sampling unit to X1 using the 1.5 mm
2
wires
with ferrule.
°
Line 1 / wire 1 = X1 : 1
°
Line 1 / wire 2 = X1 : 6
°
Line 1 / wire 3 = reserve (do not cut off)
°
Line 1 / wire 4 = reserve (do not cut off)
5.
Connect the Pt100 leads of the gas sampling unit to X2 using the 1.0 mm
2
wires
with ferrule.
°
Line 2 / wire 1 = X2 : 1
°
Line 2 / wire 2 = X2 : 2
°
Line 2 / wire 3 = reserve (do not cut off)
°
Line 2 / wire 4 = reserve (do not cut off)
6.
Connect the PE line to connection terminal PE with ferrule.
7.
Clamp the two-point jumper to contacts 2 and 3.
8.
Clamp the two-point jumper to contacts 4 and 5.
MOUNTING
5
8021339/1CHC/V1-1/2021-07 | SICK
O P E R A T I N G I N S T R U C T I O N S | MARSIC280
33
Subject to change without notice
