![background image](http://html.mh-extra.com/html/sick/inspectorp631-c-mount/inspectorp631-c-mount_operating-instructions-manual_1264201043.webp)
7
Commissioning
7.1
Installing SensorApps and programming the device
NOTE
Update the device firmware version before you start using the device. Always use the
latest version, unless there is a specific need to use an older version. Download the
latest version of the firmware from the SICK Support Portal (
and install it using SICK AppManager.
Installing SensorApps on the device
Use the SICK AppManager software to manage and install SensorApp packages
(*.sapk files) on the device. The latest version of SICK AppManager is available from
.
Many SensorApps have a web user interface which is accessed by following the steps
below:
1.
Open a Google Chrome web browser window.
2.
Type the IP address of the device. The default IP address is 192.168.0.1.
Installing and starting the development environment
The SICK AppStudio development environment is used by default to program the device
and to perform diagnostics in case of faults.
1.
Download and install the latest version of SICK AppStudio from
. Administrator rights may be required on the PC to install the
software.
2.
Enter your personal license key to complete the installation.
3.
Start the program. Path:
Start
>
All programs
>
SICK
>
SICK AppStudio
4.
Establish a connection between the software and the device via Ethernet.
✓
The connection wizard starts automatically.
5.
The following IP address is configured by default on the device:
°
IP address P1: 192.168.0.1
First steps with the device
The device is supplied with a pre-installed SensorApp called ImageSetup.
1.
In SICK AppStudio, double-click the paths in the AppExplorer to display all content.
2.
Double-click the primary script file to open it in the script editor and display the
source code.
Receiving images
1.
Click on the corresponding button to start all apps.
2.
The device page (in online mode) will now display an image on the right-hand
side, enabling basic configuration to adjust parameters such as illumination, gain,
contrast, and trigger methods.
NOTE
If the device page displays Error 404, port 80 is already occupied by another piece
of software. To find out which process you need to quit, go to Task Manager > Perform‐
ance tab > Resource monitor > Network tab.
Search for port 80 among the listed ports.
COMMISSIONING
7
8019946/1EJ6/2022-02 | SICK
O P E R A T I N G I N S T R U C T I O N S | InspectorP63x Flex C-mount and S-mount
43
Subject to change without notice