•
The device can be aligned in the X- and Y-axes.
•
The mounting bracket must be able to bear the weight of the device and connect‐
ing cables without shock.
•
In mounting situations with strong vibrations, it may be necessary to provide shock
mounts.
•
Device mounting options using the four tapped blind holes or two sliding nuts
must be provided.
5.3
Mount the optics
NOTE
This mounting step is only required if the device has been delivered for self-installation.
5.3.1
Mounting the lens unit
NOTICE
Risk of damage due to electrostatic discharge!
Electrostatic discharge from the human body may damage parts of the illumination unit
or the camera housing.
The illumination variants for lenses with a focal length of 12 mm or 16 mm do not
feature any plastic lenses in front of the LEDs in the round recesses.
b
Do not insert your fingers into the recesses.
b
Do not touch the open contacts of the electrical connection for the illumination
unit on the camera housing.
MOUNTING
5
8019946/1EJ6/2022-02 | SICK
O P E R A T I N G I N S T R U C T I O N S | InspectorP63x Flex C-mount and S-mount
21
Subject to change without notice