Through-beam photoelectric sensor
Operating instructions
2
Safety notes
■
Read the operating instructions before commissioning.
■
Connection, mounting, and setting may only be performed by trained specialists.
■
Not a safety component in accordance with the EU Machinery Directive. Only for use in appli‐
cations in accordance with NFPA 79. UL-listed adapters with connecting cables are available.
Enclosure type 1
■
When commissioning, protect the device from moisture and contamination.
■
These operating instructions contain information required during the life cycle of the sensor.
3
Correct use
The GRSE18 is an opto-electronic through-beam photoelectric sensor (referred to as "sensor" in
the following) for the optical, non-contact detection of objects, animals, and persons. A sender
(WS) and a receiver (WE) are required for operation. If the product is used for any other purpose
or modified in any way, any warranty claim against SICK AG shall become void.
Image 1: GRSE18-xxxx2
Image 2: GRSE18-xxxx7
Irrtuemer
| SICK
1
8016954
.16B5
