Function
Description
Move the mouse to a corner of the region. By clicking on the corner
while holding down the left mouse button, the region can be zoomed in
or out from the selected corner. The change is made on an imaginary
straight line between the selected corner and the midpoint of the
region.
This option does not exist for the Ellipse region type.
The circles mark the support points of this freeform region. When the
mouse is moved over a circle, the circle is colored yellow. By clicking
on the circle with the left mouse button and holding down the mouse
button, this support point can be moved.
Only for the Polygon region type.
The cross marks the last point edited. This support point is the active
support point. This is important for operations like Delete, Insert Before
or Insert After (for the Polygon region type only).
7.5.2
Image display functions
Figure 23: Configuration of the image displays
Function
Description
1
Turn off the image display.
2
Heightmap
image type: Display the heightmap of the inspection object.
In the high-resolution heightmap, equal heights are displayed in the same gray
value. Areas of the inspection object that are closer to the camera (i.e., higher
on the inspection object) appear lighter. Deeper areas appear correspondingly
darker.
3
Reflectance
image type: Display light/dark image (based on the reflection of the
laser beam into the camera).
OPERATION
7
8027445/V1-0/2022-06-15 | SICK
O P E R A T I N G I N S T R U C T I O N S | FOS-HVS
33
Subject to change without notice
