![background image](http://html.mh-extra.com/html/sick/flow-x/flow-x_operating-instructions-manual_1264313039.webp)
39
8015675/1EEU/2021-12| SICK
O P E R A TI N G I N S T R UC TI O N S | Flow-X
Subject to change without notice
TROUBLESHOOTING
6
6.2.2
Configuration with Flow-X flow computer, webserver or module screen
Login is required to change settings. To do this, proceed as explained in the “Device
settings” Section.
1
Go to menu item “System/Modules/Module 1/COM Ports/COM1”.
2
Change the baud rate, data bits, parity and stop bits to the values set in FLOWgate
TM
.
Fig. 41: Menu item “System/Modules/Module 1/COM Ports/COM1”