![background image](http://html.mh-extra.com/html/sick/flow-x/flow-x_operating-instructions-manual_1264313010.webp)
10
8015675/1EEU/2021-12| SICK
OP E R A T I N G I N S T R U C T I O N S | Flow-X
Subject to change without notice
3
PRODUCT DESCRIPTION
3.3
Flow-X enclosure
3.3.1
Flow-X/P
The Flow-X/P enclosure is a multi-stream flow computer with integrated station module and
7-inch touchscreen and can accommodate up to 4 Flow-X modules.
Fig. 2: Flow-X/P enclosure incl. four Flow-X modules
Density/viscosity
4
[2]
Periodic time input, 100 μs to 5000 μs.
Resolution < 1ns
Digital inputs
16
[2]
Digital status inputs. Resolution 100 ns (10 MHz)
Digital outputs
16
[2]
Digital output, open collector (0.5 A DC)
Rated value 100 V, 24 mA
Pulse outputs
4
[2]
Open collector, 0.01 to 500 Hz
Inputs of the sphere
detector
4
[2]
Supports 1, 2 and 4 detector configuration mode
Resolution 100 ns (10 MHz)
Prover bus outputs
1
[2]
Meter pulse output for remote flow computers.
Resolution 100 ns (1 MHz)
Frequency outputs
4
[2]
Frequency outputs for emulation of flow meter signals. Maximum
frequency 10 KHz, accuracy 0.1%
Serial
2
RS485 / RS-232 serial input for ultrasonic counter, printer or
generic, 115kb
Ethernet
2
RJ45 Ethernet Interface, TCP/IP
[1] There are 6 analog inputs per module. Analog inputs 1 to 4 support HART.
[2] Total number of pulse digital digital o pulse o density sphere detector
prover bus o frequency outputs = 16
Signal type
Qty.
Specification
Table 1:
Flow
-
X/M inputs and outputs