SICK DUSTHUNTER SP100 Ex-2K, Operating Instructions Manual, Page: 80 / 130

80 8024493/AE00/V1-0/2020-09| SICK O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-2K
Subject to change without notice
9
CONFIGURING
Table 18: Display settings
Settings overview screen
Table 19: Assignment of the measured values in the control unit
Window Entry field Significance
Common Display
Settings
Display language Language version shown on the LC display.
Display Unit System Unit of measurement system used in displays.
Overview Screen
Settings
Bars 1 to 8 Number of the measured value for the measured value
bar of the graphic display ( see “Assignment of the
measured values in the control unit”, page 80 ).
Value Measured value index for the respective measured
value bar.
Use AO scaling When activated, the measured value bar is scaled to
the associated analog output. If this selection field is
not activated, define the limit values separately.
Range low Values for the separate scaling of the measured value
bar, independent of the analog output.
Range high
Security settings
Authorized operator Password input for the Display menu operating level
“Authorized Operator”
(Default: 1234).
Idle time Time until user level “Authorized Operator” is
automatically switched off again.
Measured value Assignment
Value 1 - Sensor Not used
Value 2 - Sensor Concentration a.c. (SL)
Value 3 - Sensor Not used
Value 4 - Sensor Not used
Value 5 - Sensor Not used
Value 6 - Sensor Not used
Value 7 - Sensor Scattered light
Value 8 - Sensor Not used
Value 1 - Control unit (MCU) Concentration s.c.dry O2 corr. (SL)