SICK DUSTHUNTER SP100 Ex-2K, Operating Instructions Manual, Page: 65 / 130

65 8024493/AE00/V1-0/2020-09| SICK O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER SP100 Ex-2K
Subject to change without notice
CONFIGURING
9
9 Configuring
9.1 Prerequisites
Prerequisite for the work described in the following is completion of assembly, installation
and commissioning as described in Sections 6, 7 and 8.
This Section covers customer-specific configurating according to the respective require-
ments.
To achieve exact measurement when using the measuring system for continuous
measurement of the dust content, the measuring system must first be calibrated using a
gravimetric comparison measurement (
see “Calibration for dust concentration mea-
surement”, page 77 ).
This Section deals with configuring via SOPAS ET, alternatively, configuration can be
performed directly on the display of the control unit (
see “Configuring on the control unit
display”, page 87 ).
9.2 SOPAS ET
9.2.1 Install SOPAS ET
●
Install SOPAS ET on a computer
●
Start SOPAS ET
●
Follow the SOPAS ET installation instructions
9.2.2 Password for SOPAS ET menus
Certain device functions are first accessible after a password has been entered.
Table 11: SOPAS ET user levels
User level Access rights
0 Operator
Displays measured values and system states
No password required.
1 Authorized operator
Displays, inquiries as well as parameters required for commissioning
or adjustment to customer-specific demands and diagnosis.
Preset password: sickoptic