8014868/YIF1/2020-10-19 • © SICK AG • Subject to change without notice 19
Design and function
Teach-in LEDs (continued)
LED
Description
Q1 near, Q1 far,
Q2 near, Q2 far,
slow … fast
in expert mode
•
“Q1 near” LED lights up and “slow … fast” LED flashes
cyclically: Select function for multifunctional input “MF”.
–
1 x: Teach
– 2 x: Laser off
–
3 x: Inactive
•
“Q1 far” LED lights up and “slow … fast” LED flashes
cyclically: Select level for multifunctional input “MF”.
–
1 x: Low active
–
2 x: High active
• DT35 and DL35 models only
"Q2 near" LED lights up and "slow … fast" LED flashes
cyclically: Select Q2 output function.
–
1 x: 4 ... 20 mA
–
2 x: 0 ... 10 V
–
3 x: Switching
Table 4:
Teach-in LEDs
Operating pushbuttons
Operating button
Description
select (–)
• In run mode
Press
select
pushbutton longer than 5 seconds: Enter or
leave teach mode.
• In teach mode
Press
select
pushbutton: Select function.
•
In fine teach mode
Move previously taught-in switching point by –10 mm.
set (+)
• In run mode (IR models only)
Press
set
pushbutton longer than 5 seconds: Enter or
leave alignment mode.
• In teach mode
Press
set
pushbutton: Perform teach, select function.
•
In fine teach mode
Move previously taught-in switching point by +10 mm.
set
• In run mode
Press
select
and
set
pushbuttons simultaneously for
longer than 10 seconds: Enter or leave expert mode.
• In teach mode
After previously performing teach, press
select
and
set
pushbuttons simultaneously for less than 1 second:
Enter or leave fine teach.
Table 5:
Operating pushbuttons
