![background image](http://html.mh-extra.com/html/sick/c4000-select/c4000-select_operating-instructions-manual_1264351051.webp)
Operating Instructions
Chapter
9
C4000 Select
8012247/RI61/2007-11-30
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
51
Care and maintenance
9
Care and maintenance
The C4000 Select safety light curtain is maintenance-free. The front screen of the C4000
Select safety light curtain and any additional front screen(s) (see “Additional front screen
(weld spark guard)” on page 74) should be cleaned at regular intervals and when dirty.
Do not use aggressive cleaning agents.
Do not use abrasive cleaning agents.
Static charges cause dust particles to be attracted to the front screen. You can prevent
this effect by using the antistatic plastic cleaner (SICK part number 5600006) and the
SICK lens cloth (part number 4003353).
How to clean the front screen and/or the additional front screen (optional extra):
Use a clean and soft brush to remove dust from the front screen.
Then wipe the front screen with a clean and damp cloth.
After cleaning, check the position of sender and receiver to make sure that the
protective device cannot be bypassed (reaching over, under or around).
Verify the effectiveness of the protective device as described in chapter 7.3 “Test
notes” on page 48.
Only factory authorized personnel may repair C4000 Select devices!
The C4000 Select is designed for maintenance-free operation. When a device requires
repair, contact your local SICK representative to coordinate the repair or exchange of the
device. Do not attempt to repair the device yourself! Any attempt to repair your C4000
Select device (e.g. removal of end cap, etc.) will void product warranty and may lead to the
loss of the safety function!
Use of controls or adjustments or performance of procedures other than those specified in
this document may result in hazardous radiation exposure per EN 60 825.
Do not attempt
to disassemble this sensor for repair!
A defective device must be returned to the manu-
facturer or a regional repair center authorized by the manufacturer for the repair of this
device.
Note
Note
WARNING