![background image](http://html.mh-extra.com/html/sick/c4000-select/c4000-select_operating-instructions-manual_1264351057.webp)
Operating Instructions
Chapter
11
C4000 Select
8012247/RI61/2007-11-30
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
57
Technical specifications
Minimum
Typical
Maximum
Extended I/O input type
(according to EN 61 131
@
2)
Type 3
. Dual-channel, PNP semiconductor,
externally short-circuit protected, externally cross-
circuit monitored e.g. from an S3000 safety laser
scanner or another C4000 Select receiver
Input voltage
HIGH
11 V DC
24 V DC
30 V DC
Input current HIGH
3 mA
5 mA
7 mA
Input voltage LOW
–30 V DC
0 V DC
5 V DC
Input current LOW
–1.2 mA
0 mA
2.5 mA
Input capacitance
5 nF
Input test pulse filtering
Test pulse rate
160/s
Test pulse gap
700
µ
s
Safe input discrepancy time
20 ms
Operating data
System connection
M12 × 5, male
Maximum cable length
30 m
Extension connection
M12 × 5, female
Maximum cable length
10 m
Ambient operating temperature
0°C
+55°C
Air humidity (non-concensing)
15 %
95 %
Storage temperature
–25°C
+70°C ( 24 h)
Enclosure rating
27)
IP 65
Housing cross-section
52 mm × 55.5 mm
Vibration resistance
5 g, 10-55 Hz acc. to IEC 60 068
@
2
@
6
Shock resistance
10 g, 16 ms acc. to IEC 60 068
@
2
@
29
Environmental data, materials
Housing
Aluminium alloy ALMGSI 0.5 (powder coated)
Front screen
Polycarbonate, scratch-resistant coating
End caps
Polyamide 6.6 CF30
Packaging
Corrugated cardboard with Instapak® inlays
Circuit boards
Glass-fibre reinforced epoxy resin with flame
retarding agent TBBPA
22)
The “Type” designation listed here describes the kind of inputs that may be connected to the extended I/O
safety input connection. This particular designation is not related to the “Type” designation defined by
IEC 61 496
@
1,
@
2.
23)
As per IEC 61 131
@
2, type 3.
24)
Maximum leakage current allowed, even in the event of an error or fault condition.
25)
These values indicate the filtering capability of the C4000 Select in evaluating OSSD signals at the extended
I/O safety capable inputs without generating a stop condition based on the test pulse occurrence.
26)
Depending on load, power supply and wire cross-section. The technical specifications must be observed; e.g.
supply voltage and permissible line resistance.
27)
In order to satisfy enclosure rating, the cover plate over the DIP switches must be secured correctly. Further,
system and extended I/O cables must be rated IP 65 or better and must also be attached to the C4000 Select
correctly. You must use protective caps that are suitable for IP 65 enclosure rating for any unused connectors.