40
If the sensitivity adjustment was not completed
normally, "CALIBRATION FAIL!" is displayed.
In that case, select [START] again to repeat the
sensitivity adjustment.
(2) Select [SPAN] (by pressing [2]).
Screen After Background Measurement
(3) Select [START] (by pressing [1]).
→
Sensitivity adjustment starts (starts counting down sixty seconds).
Note: Selecting [STOP] during sensitivity adjustment cancels the adjustment process and
restores the previous sensitivity adjusted value.
(4) Press the [ESCAPE] key.
Screen After Sensitivity Adjustment
Operation Screen (Measurement mode)
Note: During sensitivity adjustment
After 60 sec
Note: Sensitivity adjustment is completed.
