25
С К О Р О С Т Ь З В У К А
П О П Р А В К А 1
When the mode 0 is chosen, the manual input of the sound speed is
activated. Indicator shows the previously set sound speed (in m/s). Setting
up of the required speed is to be done in the same way as in the case with
setting up the number of well or well cluster. The speed range, available for
manual input, is from 200 to 499 m/s.
Example: the sound speed is 330 m/s
С К О Р О С Т Ь З В У К А
П О П Р А В К А Ф И К С
3 3 0 М / С
6.
Gas outlet and additional gain
This mode makes it possible to change the level determination
program in the case of the gas outlet from well (working with outlet
valve) "GAS OUTLET YES" or the gas inlet into the well (working
with GAI) "GAS OUTLET NO". To work on the wells where there is no
pressure at all (working with GAI), use the "INPUT" button to set the
mode "GAS OUTLET NO". When setting on the new well or on the
new well cluster, the mode "GAS OUTLET YES" is automatically set
ON. Also in this window the additional gain is shown. The additional
gain is used if reflection of the acoustic signal is low. To switch the
additional gain on, press "Input" button when parameters "ADD. GAIN"
is active to set it YES. When setting on the new well oron the newwell
cluster, the mode "ADD. GAIN NO" is automatically set on. In the
example the gas outlet mode is set on and additional gain is off.
Summary of Contents for SUDOS-mini 2
