Si-tex SNS-1100, User Manual

Page: 66 / 114

66
- User Manual
Inhibit Navigation operation
As soon as Slave mode is set, the Destination cannot be placed anymore either the C-Link
Navigation Data is received from the Master or not. Also, when the C-Link Navigation Data is
received from the Master, it will not be allowed to deactivate the Navigation.
Inhibit Route following
While navigating to the route received from the Master and the Destination is reached the
Destination will be moved to the next Waypoint on the route.
MOB handling
If the Navigation to the external Destination is active and [MOB] is pressed on the Slave chart
plotter, the MOB is placed but the navigation to the MOB is not activated.
Note While navigating to the external Destination the operating mode is switched to Master,
the navigation to the external Destination will be terminated.
C-LINK NAVIGATION DATA: ACQUISITION AND DISPLAY
As soon as the C-Link Navigation Data is received, the Slave parses the information received
and executes the relative actions depending on its current working status.
Note When the Navigation to the external Destination is activated, the Slave Chart Plotter
will show all relevant C-Link Navigation Data exactly like when the Destination is not the external
one (Destination Name, DST and BRG to Destination, calculate XTE, calculate TTG etc). These
values will be displayed all places where required and they will be used to format NMEA-0183
output data.
GRAPHICAL REPRESENTATION ON MAP DISPLAY
Fig. 4.3 - Graphical Displaying
ROUTE DATA REPORT
On the Slave chart plotter, when the navigation to the External route is received, it is possible to
display the information related to the External route by entering the Route Data Report:
[MENU] + “Route” + [ENTER] + “Report” + [ENTER]
• External Route : Name of the External Route (from $PCMPN,0)