Si-tex SNS-1100, User Manual, Page: 25 / 114

User Manual -
25
[ENTER] + "Find" + [ENTER] + "User Points" + [ENTER] + insert name of the User Point to show
on map + [Save]
The map is centered on the selected User Point.
If in User Points List page:
[MENU] + "User Points" + [ENTER] + "List" + [ENTER] + use the cursor to select the row with
the desired User Point + [ENTER]
Otherwise:
[MENU] + "User Points" + [ENTER] + "List" + [ENTER] + [Find] + insert name of the User Point
to show on map + [Save]
The split displayed map is centered on the selected User Point.
Sending/Receiving User Point
To send all User Points to an external device through the serial port:
[MENU] + "User Points" + [ENTER] + "Send" + [ENTER]
To read User Points from the NMEA input port:
[MENU] + "User Points" + [ENTER] + "Receive" + [ENTER]
Selecting User Points List page
To give information and allow the editing of all stored User Points:
[MENU] + "User Points" + [ENTER] + "List" + [ENTER]
From this page it is possible the creation of a Route with User Points:
[MENU] + "User Points" + [ENTER] + "List" + [ENTER] + [Route] + use the cursor key to
highlight the Route + [Select]
It is possible to link the User Point to the selected Route. If the selected User Point is already
linked to the Route, the same procedure is used to disconnect it from Route:
[MENU] + "User Points" + [ENTER] + "List" + [ENTER] + [Route+]