Si-tex SNS-1100, User Manual

Page: 41 / 114

User Manual -
41
3.2 MAP OPTIONS MENU
• Zoom Type
[MENU] + "Map Options" + [ENTER] + "Zoom Type" + [ENTER]
Allows larger expansion or compression of the chart scale while zooming in or out. Zoom Type
has two options; Standard (default) or Flexi-Zoom.
When in Flexi-Zoom mode, a short [ZOOM...] push causes a change of chart, whilst a long
[ZOOM...] push (press and hold) causes a pop-up window to be displayed on a corner of the
screen. The window shows the current Zoom Factor. By pressing [ZOOM IN]/[ZOOM OUT]
the map is expanded or compressed according to the zoom factor selected. The Window is
automatically closed if [ZOOM...] is not pressed for 2 seconds and the selected zoom factor will
be used at the next zoom in/out.
• Fonts & Symbols
[MENU] + "Map Options" + [ENTER] + "Fonts & Symbols" + [ENTER]
It is possible to set the size of all names and symbols drawn on the charts, selecting between
Normal size (the regular characters size) and Large size.
• Perspective View
[MENU] + "Map Options" + [ENTER] + "Perspective View" + [ENTER]
Chart data may be projected in perspective mode during navigation. This function allows setting
the panoramic View of the chart. As the upper side of the map is more compressed than the lower
side, a wider map area is visible. The perspective view allows showing more chart information
immediately ahead and around the cursor.
Fig. 3.2 - Example of Normal size font (on the left side) and Large size font (on the right side)
settings
Fig. 3.2a - Perspective View