Si-tex SNS-1100, User Manual, Page: 18 / 114

18
- User Manual
1.8 USING C-MAP By Jeppesen DATA MEDIA
The chart plotter has a built-in world map. To use the chart plotter as a navigation aid, DATA
MEDIA with detailed information for the area you wish to navigate are required. See the technical
details of your chart plotter for inserting/removing DATA MEDIA procedure.
NOTE During normal operations the DATA MEDIA should not be removed since the chart
plotter may lock up.
1.9 SIMULATION MODE
The built-in Simulator function allows you to become proficient in the use of the chart plotter.
It simulates the reception of the navigation data (Lat/Lon, Course, Speed, date, time). The
simulated ship’s position is placed at the current cursor position by the time the simulation is
activated.
To start the Simulator:
Place the cursor at your desired position + [MENU] + “Advanced Options” + [ENTER’] +
“Simulation Mode” + [ENTER] + “Simulation Mode” + [ENTER] + “On” + [ENTER]
You might insert the Speed, Heading, date and time values:
[MENU] + “Advanced Options” + [ENTER’] + “Simulation Mode” + [ENTER] +
“Speed”/”Heading”/”Date”/”Time” + [ENTER] + enter [ENTER]
To select the Cursor Control in Chart page use the cursor up/down to adjust the Speed and
the cursor left/right to adjust the Course:
[MENU] + “Advanced Options” + [ENTER’] + “Simulation Mode” + [ENTER] + “Cursor Control”
+ [ENTER] + “On” + [ENTER]
1.10 CONTROLLING THE DISPLAY
This paragraph describes how to change the display mode and how to move around the chart
by changing the chart scale.
Changing Display Mode
[MENU] + “Page” + [ENTER]
SNS 1100:
[DATA]
An icons menu appears on the screen: it shows the available pages.
Move the cursor to select the page you want and the press [ENTER]: the selected page (or
another icons menu1) appears.
In the following figures examples of pages are shown. Please notice that for some chart plotters
the boxes position may differ depending on the configuration chosen.
Fig. 1.10 - Example of Page Selection menu