Shuttle TNT, Assembly Manual

Page: 15 / 20

Page 15
STEP 9 ATTACHING THE TOWERS
ITEMS
REQUIRED
TOWERS
TOWER
CROSSBAR
1. Align the Tower Crossbar underneath the head-end of the TNT Rails to bolt holes “9”
and “10.” Insert 2 bolts into the TNT Rails and through the Crossbar. Hand tighten for now.
(Pic 9.1)
2. Align the “11” and “12” bolt holes on the Towers with the Crossbar. Insert the longer bolts
with a washer into the Tower and through the Crossbar. Place a washer on the bolt and
hand tighten the lock nuts for now. (Pic 9.2)
3. Insert 4 bolts (2 each side) into the lower 4 bolt holes on the Towers and through the bolt
holes at the base of the Head-End Stand. (Pic 9.3)
9.1
9.2 9.3