Shuttle HOT-597, User Manual

Page: 9 / 45

- 8 -
Processor Speed
System
Clock
Multiplier Processor Speed
System
Clock
Multiplier Processor Speed
System
Clock
Multiplier
Intel
Pentium
P55C MMX
233 MHz 66 MHz 3.5 x
AMD K6-2
450 MHz 100 MHz 4.5 x
Cyrix/IBM
6x86MX
PR333 100 MHz 2.5 x
200 MHz 66 MHz 3 x 400 MHz 100 MHz 4 x PR333 83 MHz 3 x
166 MHz 66 MHz 2.5 x 380 MHz 95 MHz 4 x PR300 75 MHz 3 x
Intel
Pentium
P54C
200 MHz 66 MHz 3 x 366 MHz 66 MHz 5.5 x PR300 66 MHz 3.5 x
166 MHz 66 MHz 2.5 x 350 MHz 100 MHz 3.5 x PR266 83 MHz 2.5 X
133 MHz 66 MHz 2 x 333 MHz 95 MHz 3.5 x PR266 66 MHz 3.5 X
100 MHz 66 MHz 1.5 x 333 MHz 66 MHz 5 x PR233 75 MHz 2.5 x
IDT-C6
225MHz 75 MHz 3 x 300 MHz 100 MHz 3 x PR233 66 MHz 3 x
200MHz 66 MHz 3 x 300 MHz 66 MHz 4.5 x PR200 75 MHz 2 x
AMD K6
300 MHz 66 MHz 4.5 x 266 MHz 66 MHz 4 x PR200 66 MHz 2.5 x
266 MHz 66 MHz 4 x
AMD K5
PR166 66 MHz 2.5 x
Cyrix/IBM
6x86 (L)
P200+ 75 MHz 2 x
233 MHz 66 MHz 3.5 x PR133 66 MHz 1.5 x P166+ 66 MHz 2 x
200 MHz 66 MHz 3 x
166 MHz 66 MHz 2.5 x
CPU Configuration Table
CPU Configuration - SW1, JA26 & J19
SW1 and J19 are the Jumpers that you need to set your CPU on HOT-597. Make sure that you know
the type of CPU that you are installing and refer to the proper settings which are listed below.
Normally, CPU voltage is auto-detected on HOT-597 and is set to Auto-detected when HOT-597 is
delivered. If you have a higher frequency CPU or you want to set CPU frequency and voltage
manually, please refer to next two sections.
AMD-K5 Series CPUs Settings
Processor Speed
Frequency Setting
SW1, JA26
Jumper Block J19
Vcore/Vio
Auto-detect
AMD-K5
PR166
66MHzx2.5
3.52V/3.52V
PR133
66MHzx1.5
Table 2-3
Table 2-2