- 18 -
Connectors
Front Panel Connectors (JP6)
Hardware Reset Connector - RST
Attach 2-pin hardware reset switch to it.
Closing the reset switch restarts the system.
PW-LED Connector
Power LED connector is a 3-pin connector for
attached to the case's Power LED.
KeyLock Connector
KeyLock connector is a 2-pin connector for a
lock that may be installed on the system case
for enabling or disabling the keyboard.
Speaker Connector - Speaker
PC speaker connector may attach a 4-pin PC
speaker cable from the case to this connector.
SMI Connector - SMI
Hardware System Management Interface
connector may attach a 2-pin momentary switch
to it. When push it will force system get into
power saving mode, and the system will resume
when switch is pushed again.
GLED Connector - GLED
Attach a 2-pin Green LED cable to it. The Green LED lights when the system get into power
saving mode. The Green LED off when the system resume back to normal mode.
HD LED Connector - IDE
Attach a 2-pin IDE drive LED cable to this connector. The LED lights when an IDE device is
active.
ATX Power On/Off Switch Connector - PWR_BT
Attach a 2-pin momentary type switch to this connector for truning on or off your ATX power
supply.
Figure 2-6
