HOT- 565 User's Manual 30
Integrated Peripherals
IDE HDD Block Mode
This item is used to set IDE HDD Block Mode. If your IDE Hard Disk
supports block mode, then you can enable this function to speed up the
HDD access time. If not, please disable this function to avoid HDD access
error.
IDE Primary/Secondary Master/Slave PIO
In these items, there are five modes defined in manual mode and one
automatic mode. There are
0, 1, 2, 3, 4,
and
AUTO
is the default settings
for on board Primary/Secondary Master/Slave PIO timing.
IDE Primary/Secondary Master/Slave UDMA
On this mainboard, Intel 430TX PCIset improves IDE transfer rate using
Bus Master UltraDMA/33 IDE which can handle data transfer up to 33MB/
sec. The options are
Disabled
and
Enabled,
and
Enabled
is the default
settings for on board Primary/Secondary Master/Slave
UltraDMA33
.
On-Chip Primary/Secondary PCI IDE
This item is used to defined on chip Primary/Secondary PCI IDE controller
is
Enable
or
Disable
setting.
