HOT- 565 User's Manual 20
drives parameter when system power-on.
If a hard disk drive has not been installed select NONE and press <Enter>.
Drive A type/Drive B type
This item specifies the types of floppy disk drive A or drive B that has been
installed in the system.
Video
This item selects the type of adapter used for the primary system monitor
that must matches your video display card and monitor. Although secondary
monitors are supported, you do not have to select the type in Setup.
Error halt
This item determines if the system will stop, when an error is detected
during power up.
Memory
This item is display-only. It is automatically detected by POST (Power On
Self Test) of the BIOS.
Base Memory
The POST of the BIOS will determine the amount of base (or conven-
tional) memory installed in the system. The value of the base memory is
typically 512K for systems with 512K memory installed on the
mainboard, or 640K for systems with 640K or more memory installed on
the mainboard.
Extended Memory
The BIOS determines how much extended memory is present during the
POST. This is the amount of memory located above 1MB in the CPU's
memory address map.
