30
Disable On board LAN EPROM (JP17)
The CNR interface provides four kinds of solution for users: audio, modem,
LAN and Home LAN. Hence, if you decide to use the LAN solution of
CNR, you should power off system and short pin 1 & pin 2 of JP17 by mini
jumpers, then run BIOS setup program to disable onboard LAN EPROM
through option “Integrated Peripherals > Onboard/CNR LAN selection”.
Pin 1-2 (Disable onboard lan)
Pin 2-3
(Default, Enable onboard lan)
A1
JP17
1
1
1
Safe Mode Boot Setting (JP30)
This jumper allows you to force system boot in “Safe mode”. The “Safe
mode” means system will load BIOS default setting value while in POST
and force CPU speed at 800MHz. You can short pin 1-2 of JP30 by mini
jumpers to enable safe mode boot.
Pin 1-2 (Enable- safe mode boot)
Pin 2-3 (Normal- Disable the function)
A2
1
1
JP30
1
