64
Max Saving
Maximum power management.
Suspend Mode=Allows you to set each mode individually.
HDD Power Down=1min.
User Defined
Allows you to set each mode individually. When this
item not disabled, each of the ranges are from 1 min. to 1 hr. except
for HDD
Power Down which ranges from 1 min. to 15 min. and
disable.
Ø
The choice: User Define, Min Saving, or Max Saving.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
This selection will cause the system to turn
off the vertical and horizontal synchronization ports and write blanks
to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Initial display power management signaling.
Ø
The choice: V/H SYNC+Blank, Blank Screen, or DPMS.
Video Off In Suspend
This item determines the manner in which the monitor is blanked.
Ø
The choice: Yes or No.
Suspend Type
This item allows you to select the Suspend Type.
Ø
The choice: PwrOn Suspend, Stop Grant.
MODEM Use IRQ
This item determines the IRQ in which the MODEM can use.
Ø
The choice: 3, 4, 5, 7, 9, 10, 11, or NA.
Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system
to enter the Soft-Off state when the system has "hung.".
Ø
The choice: Instant-Off or Delay 4 Sec.
Wake-Up Events
These items include Primary IDE0/1, Secondary IDE 0/1, Floppy Disk,
Serial Port, Parallel Port, and PCI PIRQ[A-D]#. allow you to set wake
up events from power management.
