36
C3
C4
C5
ATX Power On/Off Switch Connector (Power Switch)
The Power On/Off Switch is a momentary type switch used for turning on
or off system’s ATX power supply. Attach connector cable from Power Switch
to the 2-pin PWR SW header on the mainboard.
ACPI & Power LED (ACPI & Power LED)
If you get a 3-pin LED in dual color connector, attach the cable from housing's
front panel to the PWR LED header on board. The LED stays light while the
system is running ; and it turns to another color while the system is operat-
ing from normal mode to ACPI mode.
Hardware Reset Connector (Reset)
Attach 2-pin hardware reset switch cable to the RST header. Pressing reset
switch causes system to restart.
CN24
1
IDE LED
Power
Switch
ACPI &
Power LED
Reset
SPEAKER
CN24
1
IDE LED
Power
Switch
ACPI &
Power LED
Reset
SPEAKER
CN24
1
IDE LED
Power
Switch
ACPI &
Power LED
Reset
SPEAKER
