65
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank
This selection will cause system to turn off vertical and horizontal
synchronization ports and write blanks to video buffer.
Blank Screen
This option only writes blanks to video buffer
DPMS
Support
Initial power management signal of display.
"
The choice: V/H SYNC + Blank, Blank Screen, DPMS Support.
Modem Use IRQ
If you want an incoming call on a modem to automatically resume
system from a power-saving mode, use this item to specify interrupt
request line (IRQ) that is used by modem. You might have to connect
the fax/modem to Wake On Modem connector on the mainboard.
"
The choice: 3, 4, 5, 7, 9, 10, 11, N/A
Soft-Off by PWRBTN
This is a specification of ACPI and supported by hardware. When
Delay 4 sec.
is selected, the soft power switch on the front panel
can be used to control power On, Suspend and Off. If the switch is
pressed less than 4 sec during power On, the system will go into
Suspend mode. If the switch is pressed longer than 4 sec, the system
will be turned Off. The default setting is
Install-Off
, soft power
switch is only used to control On and Off, there is no need to press
4 sec, and there is no Suspend.
"
The choice: Instant-Off, Delay 4 Sec.
AC Resume Function
This item lets user to determine the state that your PC returns to after a
power failure. “Always on” means that PC will restart. “Always off”
means not to boot and “Former-sts” means the state it is before the
power interruption.
"
The choice: Always on, Always off, Former-sts.
