36
ATX Power Connector (ATX 1)
Locate the 20-pin male header ATX power connector (ATX 1) on your
mainboard. Plug the power cable from the ATX power supply unit di-
rectly into ATX 1 power supply connector.
Note 1 :
The ATX power connector is directional and will not go in
unless the guides match perfectly. Make sure that pin#1 is prop-
erly positioned.
Note 2:
Make sure the latch of the ATX power connector clicks into place
to ensure a solid attachment.
Note 3:
Your ATX power supply must be supplied to ACPI +5V standby
power and at least 720mA compatible.
Note 4:
Make sure your power supply have adequate power for higher
speed processor installed.
E1
Audio_in header (CD1 and CD 2)
Use the audio cable provided with CD-ROM/DVD ROM drive to join audio
connector on rear edge of CD-ROM/DVD ROM drive with one of the two
audio-in connectors CD1 and CD2 on the mainboard.
E2~E3
AT
X 1
CD2
CD1
