53
Swap Floppy Drive
If you have two floppy diskette drives in your system, this item allows
you to swap the assigned drive letters so that drive A becomes drive B,
and drive B becomes drive A.
"
The choice: Enabled, Disabled.
Boot Up Floppy Seek
If this item is enabled, it checks the geometry of the floppy disk
drives at start-up time. You don’t need to enable this item unless you
have an old diskette drive with 360K capacity.
"
The choice: Enabled, Disabled.
Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when system
starts.
"
The choice: On, Off.
Gate A20 Option
This item defines how the system handles legacy software that was
written for an earlier generation of processors. Leave this item at the
default value.
"
The choice: Normal, Fast.
Typematic Rate Setting
If this item is enabled, you can use following two items to set typematic
rate and typematic delay settings for keyboard.
"
The choice: Enabled, Disabled.
Typematic Rate (Chars/Sec)
If the item Typematic Rate Setting is enabled, you can use this item to
define how many characters per second are generated by a held-down
key.
"
The choice: 6,8,10,12,15,20,24,30.
Typematic Delay (Msec)
If the item Typematic Rate Setting is enabled, you can use this item
to define how many milliseconds must elapse before a held-down
key begins generating repeat characters.
"
The choice: 250, 500, 750, 1000.
