![background image](http://html1.mh-extra.com/html/shure/qlx-d-series/qlx-d-series_user-manual_1262413033.webp)
Shure Incorporated
33/60
1.
2.
3.
4.
1.
2.
1.
2.
Custom Groups
Specific channels and frequencies can be selected and placed into custom groups. Custom groups are commonly used to as
sign networked receivers to a specific range of frequencies or to pre-configure receivers for rental applications. Once a custom
group has been created, it can be loaded to the receiver using the
group
menu.
When network scan is used to assign frequencies from a receiver with a custom group selected, all of custom groups (U1, U2,
U3, etc...) from that receiver will be loaded to all other receivers on the network.
Creating Custom Groups
Selecting A Custom Group
The receiver has 6 custom groups available named U1, U2, U3, U4, U5, and U6.
Press
menu
while holding the
enter
button to access the Custom Group screen.
Press
enter
to enable editing of a group (indicated by the group flashing).
User the arrow buttons to select a group (U1 to U6).
Press
enter
to advance to channel selection.
Selecting a Channel
Use the arrow buttons to select a channel (1-60). Each group can contain up to 60
channels (frequencies).
Press
enter
to save the selected channel and advance to frequency assignment.
Assigning a Frequency to
a Channel
Use the arrow buttons to assign a frequency to the selected channel.
Press
enter
to save.
After pressing
enter
, the channel will flash to allow for adding more channels and frequen
cies to the custom group. To add more channels and frequencies, repeat steps 2 and 3.
When finished, press the
menu
button several times to return to the main menu.