Shure Incorporated
10/60
◦
◦
1.
2.
3.
4.
Step 3: Install Batteries into Transmitter
①
Accessing the Battery Compartment
Press the side tabs on the bodypack or unscrew the cover on the handheld as shown to access the battery compartment.
②
Installing Batteries
AA Batteries:
Place batteries (note polarity markings) and AA Adaptor as shown
Shure SB900 Battery:
Place battery as shown (note polarity markings), remove AA Adaptor from bodypack transmitter,
stow AA Adaptor in door for handheld transmitter
Note:
If using AA batteries, select a battery type from the transmitter menu to ensure accurate battery metering.
Step 4: IR Sync to Create an Audio Channel
Turn on the transmitter.
Press the
sync
button on the receiver. The red
ir
LED will blink indicating that sync mode is active.
Align the IR sync windows of the transmitter and receiver at a distance of <15 cm (6 in.). When the transmitter and re
ceiver are aligned, the red
ir
LED remains on and the sync will automatically occur.
sync good
appears on the display when IR sync is complete. The blue
rf
LED will illuminate indicating that the transmit
ter is within range of the receiver.
