![background image](http://html1.mh-extra.com/html/shure/qlx-d-series/qlx-d-series_user-manual_1262413030.webp)
Shure Incorporated
30/60
1.
2.
3.
1.
2.
3.
1.
2.
3.
4.
Manual Frequency Selection
Manual frequency selection can be used instead of groups and channels to set the transmitter and receiver to a specific fre
quency. For example, an audio channel can be created by setting the receiver and transmitter to same frequency.
Setting the Receiver Frequency
Press
menu
to navigate to the
frequency
setting option.
Use the arrow buttons to adjust the frequency. Press and hold for faster scrolling.
Press
enter
to save.
Setting the Transmitter Frequency
Press
menu
to navigate to the
frequency
setting option.
Use the arrow buttons to adjust the frequency. Press and hold for faster scrolling.
Press
enter
to save.
Linking Two Transmitters to a Receiver
Linking two transmitters to a receiver offers the flexibility to provide a performer with either a handheld or bodypack transmitter
to meet their preference. For performances requiring instrument changes, two bodypack transmitters can be linked to a single
receiver.
Note:
Only turn on and operate one transmitter at a time to prevent interference between the transmitters.
Syncing the Transmitters to the Receiver
Both transmitters must be individually linked to the receiver by performing an IR Sync.
Turn on the first transmitter and perform an IR Sync with the receiver.
Perform a sound check and adjust the transmitter gain if necessary. When finished, turn off the transmitter.
Turn on the second transmitter and perform an IR Sync with the receiver.
Test the transmitter at performance conditions and adjust the transmitter gain if necessary. When finished, turn off the
transmitter.