![background image](http://html1.mh-extra.com/html/shure/mxw-series/mxw-series_user-manual_1261303044.webp)
44
Software
Control Software for the MXW Audio Network Interface
The MXW Audio Network Interface features a control software to mange the analog inputs and outputs of the MXW system, in addition to the 4-port gigabit
switch on the back panel of the network interface.
By default, all MXW devices have the password 'admin' applied to the control software. When logging in for the first time, enter 'admin' into the field to log on
as the administrator. The password can be changed from the Preferences tab.
Note: For optimal system performance, the control software should not be open to more than seven tabs or windows.
Control Bar
① Tabs
The software has an Inputs/Outputs tab for managing audio and a
Preferences tab for system configurations.
② Identify Button
This button sends a command to the hardware to flash front-panel
LEDs for easy identification.
③ Security Level
Displays the access level of the user: Administrator, Technician, or
Guest.
Log On Page
① User
There are three security levels to the Control Software: Admin, Tech
and Guest. By default, only Admin is enabled. Log on and go to the
Preferences tab to manage the User log on.
Admin (default):
Full editing rights. The Admin can enable or disable a
Tech-level logon.
Tech:
Partial editing rights, limited to microphone management on the
Monitor tab.
Guest:
Monitoring only.
② Password
Enter the password to log on as an Admin or Tech. The default
password is 'admin' for the Admin user. To change the password, log
on as an Admin and go to the Preferences tab.
③ Keep Me Logged On Button
When selected, this allows the user to bypass the Log On page when
reopening the control software.
④ Language Selection
Selects the language for the GUI. This setting will be saved to the
computer.
⑤ Log On Button
Press the button to log onto the control software.
Note: Default password is 'admin'
④ Log Off
Logs the user out of the software.
⑤ Language Selection
Selects the language for the control software interface. This setting will
be saved to the computer.
①
②
④
⑤
③
①
②
④
⑤
③