33
Wireless Management
a
Room A Room B
Room C Room D
Setting RF Power
The RF radius of a configuration can be limited to allow another MXW system to re-use the frequency time-slots. It is best practice to use the lowest setting
that supports the installation. Perform a walk-around test with the transmitters to ensure that the coverage setting is sufficient.
The RF Power is set from the Preferences tab of the control software. The setting applies to each access point in the Configuration. Reference the following
table for setting the RF Power.
RF Power Levels
Setting
Transmitter Power (mW)
Coverage Distance from APT
Typical Application
Max
80
150
Ballroom and auditorium spaces
High
16
100
Large meeting spaces and lecture
halls
Medium (default)
3
50
Conference, training and
multipurpose rooms
Low
1
25
Small video-conference rooms and
boardrooms