Showven uFlamer Volcano, User Manual, Page: 8 / 22

7
PV ON Fuel level
0-80% (default value
20%)
When fuel level lower than set value,
priming valve will turn on automatically.
PV Off Fuel Level
10%-100% (default value
100%)
When fuel level reached set value, proming
valve will turn off automatically
PV EMER OPEN OFF / ON
Default value is OFF
ON: Turn on the Priming Valve for 3s
Current Voltage 12V Mainboard power supply voltage display
▲
Operation Instructions
1. Direction explanation
Please read the safety distance printed on top panel of CIRCLE FLAMER carefully.
1.1-5 indicate the related head number of uFlamer Volcano. Right side one is head 1, head 3 is in
the middle, left side is head 5.
2. Audience side and control side are indicated in the picture.
3. Safety distances for uFlamer Volcano are indicated in above picture. At least 15m in all
projection directions, at least 10m to the audience side and control side.
2. Quick Operation Sheet
Immediately upon receiving the machine, carefully unpack the packing carton, check the
machine received in good condition. Ensure safety operation of machine, please do following
below operation procedures when operate uFlamer Volcano.
Operation step Schematic diagram and explanation Explanation
Installation
The device can only be placed
horizontally, if placed on truss, please
locked with extra safety ropes.
Locate safety
lock at TEST
MODE
Before operate machine please
locate safety lock at TEST MODE.
TEST MODE: operator can test the
device, but the fuel ejection
function disabled, so there is no fuel
eject and flames.
USER MODE: the device can