Showven uFlamer Volcano, User Manual, Page: 2 / 22

1
USER MANUAL
uFlamer Volcano
★
Please read this manual carefully before operating this product.
★
Warranty card attached in the manual, please keep it well.
▲
Warning
 Unauthorized repair are prohibited, it may cause serious incident.
 Make sure power supply in consistent with the rated voltage of the equipment, and the
socket must well grounded. Unplug and turn off the machine when not use.
 Before connect the power cable, communication DMX cable should well connected and
ensure the command keep at firing OFF status. And safety lock stay at test mode.
 The device can only be placed horizontally. Safety distances are marked on the device (at
least 15m in all projection directions, at least 10m to the other sides of the device).
 After turning on the device, no person allows to stay in the danger area. Ensure all persons
that are part of the show be informed about the safety distance, risks and functions of the
device.
 Always have a CO2 fire extinguisher and an extinguishing blanket in case of needed.
 If there be any doubt as to the safety operation of the device in any circumstances, the
device should be taken out of service immediately. Be sure the device is in good operating
condition before use. If fail to fire correctly, immediately shut down and check it accordingly.
Any questions please always contact SHOWVEN (info@showven.cn) for help.
 Be sure to use high quality flame fluid, otherwise, it is easily lead to failure or danger. Be
careful when refill the flame fluid tank. Please keep flame fluid away from heat source,
sparks, fire or other possibility of ignition. Do not smoke!
 The operator responsible for the control of uFlamer Volcano must always have a clear view
of the device, so that he/she can stop the show immediately when there is danger. The main
AC power switch should near operator. So that operator can turn off the power of all
devices in case of abnormal.
 The device shall not be altered and applied to other use purpose.
Disclaimers:
SHOWVEN technologies Co., Ltd excludes liability for unsafe situations, accidents and damages
resulting from:
1. Ignoring warnings or regulations as shown on flamer or this manual.
2. Use for other applications or circumstances other than those indicated herein.
3. Changes to the flamer, including use of non-original spare parts.
4. Removed safety cover without authorization from SHOWVEN.
5. Use this machine by unqualified or untrained personnel.
6. Improper use of machine.