Showven uFlamer Volcano, User Manual, Page: 7 / 22

6
E6 Tip Err if the machine slant over 45° , it stops running, system will report E6
E7 Low Fuel When fuel 0 report E7 low fuel
6. Interface setup:
1. 6CH Normal Mode / 6CH Pro Mode
Press “MENU” to switch through setup menu.
Menu Range Explanation
Set DMX Address 1~512 DMX address setup
2. 6CH Safe Mode
Press “MENU” to switch through setup menu.
Menu Range Explanation
Set DMX Address 1~512 DMX address setup
Safety Address 1~512 Safety Address
7. Advanced Interface:
Press “MENU” 3s enters advanced interface, press “MENU” to switch interface, press “MENU” 3s
can back to main interface.
Menu Contents Explanation
Drive Test
OFF / Pump / Igniter /
Relief Valve / Jet Valve
--
1. Pump
Pump running 1s, if pressure reached the
target value, the pump will not running.
Keep safety Lock located at USER MODE
before test.
2. Igniter Ignition from head No.1 to 5
3. Relief Valve Relief valve will be on and off 3 times
4. Priming Valve Priming Valve will on and off 3 times
5. Jet Valve 1
6s after Relief Valve was on, related Jet
Valve will on and off 3 times. Keep safety
Lock located at USER MODE before test.
6. Jet Valve 2
7. Jet Valve 3
8. Jet Valve 4
9. Jet Valve 5
Ext Ignite OFF / ON
Trigger through 9-60V ExtIgnite signal
(such as fireworks ignitor signal) ON/OFF
switch. Firing all 5 heads.
Ext Ignite Time 0.1-2.0 S
Firing time setup when activated through
ExtIgnite signal
Language English / Chinese Language switch
Mode Select OFF / ON Turn ON/OFF tip over function
DMX channel mode
6CH Normal Mode / 6CH
Pro Mode/ 6CH Safe
Mode
DMX channel mode switch, detail info
please check 5.DMX control
Default Parameter OFF / ON Reset default parameter settings
Invert OFF / ON
When turned on, all angles will be
mirrored.
Fuel Input OFF / ON
When ON, operators can fuel machine
through Fuel Input Quick Coupler