SHOWTEC spectral 260 white, User Manual

Page: 11 / 24

10
Ordercode: 43518
Spectral 260 White
Multiple Spectrals (DMX512 Mode)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Use the safety cable which is included.
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-p XLR cable to connect the Spectral and other devices.
05) Link the units as shown in (Fig. 04), Connect a DMX signal cable from the first unit's DMX "out" socket
to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
Dipswitch #10 should be OFF.
06) Do not supply power before the whole system is set up and connected properly.`
Design your show according to your DMX controller functions.
Multiple Spectrals DMX Set Up
Fig. 04
Note: Link all cables before connecting electric power!