SHOWTEC spectral 260 white, User Manual

Page: 10 / 24

9
Ordercode: 43518
Spectral 260 White
Multiple Spectrals ( Master/Slave control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Use the safety cable which is included.
03) Use a 3-p XLR cable to connect the Spectral and other devices.
The pins: 1. Earth
2. Signal (-)
3. Signal (+)
04) Link the units as shown in (Fig. 03), connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. Dipswitch
#10 must always be set to ON for Slave control.You can use the same functions on the master device
as described on page 7+8 (Auto and Static colors). This means you can set your desired operation
mode on the master device and all slave devices will react the same as the master device.
Master control (Auto programs) : Dipswitch #12 should be on.
Use dipswitch 1-4 to set the desired program.
Master control (Static colors) : Dipswitch #10 and#12 should be
on. Use dipswitch 1-4 to set the luminous intensity of the fixture.
Slave control: Dipswitch #10 should be on.
Multiple Spectrals ( Master/Slave control)
Fig. 03